search

Welcome to Xingtai Renlong Rubber Products Co., Ltd. Official website

How to install the hydraulic seal ring correctly


Time:

2023-06-08

The correct method of installing the hydraulic sealing ring is as follows: 1. Check the relevant surfaces of the piston, cylinder, and installation guide sleeve, and ensure that they are clean, burr-free, and edge-free in full.

The correct method of installing the hydraulic sealing ring is as follows:

1. Check the relevant surfaces of the piston, cylinder, and installation guide sleeve, and ensure that they are clean, burr-free, and edge-free in full.

2. The installation tools require smoothness, no edges, and sharp corners to ensure that the seals will not be damaged in any form during the installation process.

3. During installation, a small amount of grease can be applied to the seals and related surfaces of the cylinder to facilitate installation, but no grease is allowed to remain between the rubber elastomer and the sliding sealing ring, otherwise it will affect the sealing performance.

4. Whether it is vertical or horizontal installation, the coaxiality of the piston and the cylinder should be maintained. Excessive eccentricity is likely to damage the seal.

5. The installation speed should not be too fast, otherwise the seal will be damaged.

Keyword:

installing