Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
What are the assembly requirements for mechanical seals when mechanical equipment is installed?
Time：
2021-11-12
1. The mechanical sealing parts should not be damaged or deformed; there should be no cracks, scratches and other defects on the sealing surface.
1. The mechanical sealing parts should not be damaged or deformed; there should be no cracks, scratches and other defects on the sealing surface.
2. During the assembly process, the parts should be kept clean and there should be no rust; the end faces of the dynamic and static rings of the spindle sealing device and the surface of the sealing ring should be free of foreign objects and dust.
3. The compression amount of the mechanical seal should comply with the provisions of the equipment technical documents.
4. After assembly, the rotor should be rotated flexibly by hand.
5. There shall be no continuous relative rotation and no leakage between the dynamic and static rings and the matching components.
6. The flushing and sealing system of the mechanical seal should be kept clean and free of foreign objects.
Keyword：
mechanical
Xingtai Renlong Rubber Products Co.,Ltd
It is a modern private enterprise specializing in the production and sales of seals for automobiles, agricultural machinery and construction machinery.
Contact
Dongliu Village, Tiankou Town, Renxian County, Xingtai, Hebei, China
Chris
Emma
Boss