What are the types of oil seals?What are the types of automobile oil seals?
Time:
2023-06-08
Oil seals are generally divided into monomer type and assembly type. The assembly type is a free combination of skeleton and lip material, which is generally used for special oil seals.It is a mechanical component used to seal grease (oil is the most common liquid substance in the transmission system, and it also refers to the general meaning of liquid substance). It isolates the parts that need to be lubricated in the transmission parts from the output parts so as not to let the lubricating oil leak.The seals used for static seals and dynamic seals (generally reciprocating motion) are called oil seals.
Oil seals are generally divided into monomer type and assembly type. The assembly type is a free combination of skeleton and lip material, which is generally used for special oil seals.It is a mechanical component used to seal grease (oil is the most common liquid substance in the transmission system, and it also refers to the general meaning of liquid substance). It isolates the parts that need to be lubricated in the transmission parts from the output parts so as not to let the lubricating oil leak.The seals used for static seals and dynamic seals (generally reciprocating motion) are called oil seals.
Precautions
1. Preparations and precautions before starting.
A. Comprehensively inspect the mechanical seals, as well as whether the installation of ancillary devices and pipelines is complete, and whether they meet the technical requirements.B. Perform a static pressure test before starting the mechanical seal to check whether the mechanical seal is leaking.If there are more leaks, the cause should be found out and efforts should be made to eliminate them.If it is still invalid, it should be disassembled for inspection and reinstalled.Generally, the static pressure test pressure is 2~3 kg/cm2.C. Press the pump to rotate the pallet truck to check whether it is brisk and even.If the pallet truck is struggling or does not move, you should check whether the assembly size is wrong and whether the installation is reasonable.
2. Installation and outage
A. Keep the sealed chamber full of liquid before starting.For conveying the solidified medium, steam is applied to heat the sealed chamber to melt the medium.The car must be turned before starting to prevent the soft ring from breaking due to sudden start-up.B. For mechanical seals that use the oil sealing system outside the pump, the oil sealing system should be activated first.After parking, the oil sealing system is finally stopped.C. After the hot oil pump is out of operation, the oil sealing chamber and the cooling water sealed on the end face cannot be stopped immediately. The cooling water can only be stopped when the oil temperature at the end face seal drops below 80 degrees to avoid damage to the sealing parts.
Keyword:
Oil seals
Next
Next